Emergency Services

The Police, Ambulance Services and Fire Brigade are all expected to provide a rapid response in the event of an emergency.  Information and communication is key to the speed and level of response provided.  The Emergency Services therefore rely heavily on IT and Communication systems to facilitate a quick and accurate response.  Any power outage, even for a few seconds, can seriously compromise response times.  Relevant UPS Ltd products and resources for the Emergency Services can be found below.

Related Products

  • PowerWAVE 3000TP (10-20kVA)

    PowerWAVE 3000/TP

    Single phase
    Single phase
    A single-phase installation consists of a single sine wave input and is typically a single phase of a larger three phase supply. A typical example of this would be a local three pin UK socket which uses 230/240 VAC to supply power. Most small power hardware including rack-mounted servers, telecoms, network switches, computer systems or any device running from a standard three pin UK plug, operate from a single phase supply.
    Three phase
    Three phase
    A three-phase installation uses the full three phases which are generated from the grid. A three phase electrical supply comprises of three individual sine waves, and can be installed as either a three wire or three wire & neutral configuration. A three-phase source would typically come from a local transformer, with the standard three phase voltage being 400/415 VAC.
    10kVA & 20kVA
    10kVA & 20kVA
    Understanding the total kVA requirement of a critical load is a key part of establishing a UPS’ true sizing requirement. For more information see kVA calculator and guide to choosing a UPS.
    Standalone
    Standalone
    Standalone UPS systems allow several units to be operated in tandem (known as horizontal scaling) to provide for a greater load.
    One of the most compact single phase UPS systems delivering critical power protection of up to 80 kV
    Read moreCompare
  • PowerWAVE 5000/TP 60-500kVA (Stand-alone 10-50kVA)

    PowerWAVE 5000/TP

    Three phase
    Three phase
    A three-phase installation uses the full three phases which are generated from the grid. A three phase electrical supply comprises of three individual sine waves, and can be installed as either a three wire or three wire & neutral configuration. A three-phase source would typically come from a local transformer, with the standard three phase voltage being 400/415 VAC.
    10-50 kVA
    10-50 kVA
    Understanding the total kVA requirement of a critical load is a key part of establishing a UPS’ true sizing requirement. For more information see kVA calculator and guide to choosing a UPS.
    Standalone
    Standalone
    Standalone UPS systems allow several units to be operated in tandem (known as horizontal scaling) to provide for a greater load.
    Standalone three-phase UPS system available in seven power ratings from 10 to 50kVA and in different
    Read moreCompare
  • PowerWAVE 6000

    Three phase
    Three phase
    A three-phase installation uses the full three phases which are generated from the grid. A three phase electrical supply comprises of three individual sine waves, and can be installed as either a three wire or three wire & neutral configuration. A three-phase source would typically come from a local transformer, with the standard three phase voltage being 400/415 VAC.
    60-500 kVA (500kW)
    60-500 kVA (500kW)
    Understanding the total kVA requirement of a critical load is a key part of establishing a UPS’ true sizing requirement. For more information see kVA calculator and guide to choosing a UPS.
    Standalone
    Standalone
    Standalone UPS systems allow several units to be operated in tandem (known as horizontal scaling) to provide for a greater load.
    Transformerless 3 phase UPS from 60 kVA to 500 kVA, parallelable up to 5 mVA. Offers unrivalled prot
    Read moreCompare
  • PowerWAVE 8000DPA

    Three phase
    Three phase
    A three-phase installation uses the full three phases which are generated from the grid. A three phase electrical supply comprises of three individual sine waves, and can be installed as either a three wire or three wire & neutral configuration. A three-phase source would typically come from a local transformer, with the standard three phase voltage being 400/415 VAC.
    10-200 kVA per frame
    10-200 kVA per frame
    Understanding the total kVA requirement of a critical load is a key part of establishing a UPS’ true sizing requirement. For more information see kVA calculator and guide to choosing a UPS.
    Modular
    Modular
    UPS systems such as the PowerWAVE 9000DPA Series are configured by plugging up to five modules into a 19” rack to meet the capacity and redundancy requirement of the application load. This provides more flexibility and scalability than a complete cabinet containing a single standalone system.
    Three-phase UPS built for low to medium, high density power protection applications. Leading-edge mo
    Read moreCompare
  • PowerWAVE 9000DPA (Modular 10-250kVA)

    PowerWAVE 9000DPA

    Three phase
    Three phase
    A three-phase installation uses the full three phases which are generated from the grid. A three phase electrical supply comprises of three individual sine waves, and can be installed as either a three wire or three wire & neutral configuration. A three-phase source would typically come from a local transformer, with the standard three phase voltage being 400/415 VAC.
    30-250 kVA
    30-250 kVA
    Understanding the total kVA requirement of a critical load is a key part of establishing a UPS’ true sizing requirement. For more information see kVA calculator and guide to choosing a UPS.
    Modular
    Modular
    UPS systems such as the PowerWAVE 9000DPA Series are configured by plugging up to five modules into a 19” rack to meet the capacity and redundancy requirement of the application load. This provides more flexibility and scalability than a complete cabinet containing a single standalone system.
    A revolutionary rack-mounted uninterruptible power supply designed with ‘hot swap’ modules for futur
    Read moreCompare
  • PowerWAVE 9500DPA (Modular 100-500kVA)

    PowerWAVE 9500DPA

    Three phase
    Three phase
    A three-phase installation uses the full three phases which are generated from the grid. A three phase electrical supply comprises of three individual sine waves, and can be installed as either a three wire or three wire & neutral configuration. A three-phase source would typically come from a local transformer, with the standard three phase voltage being 400/415 VAC.
    100-500 kVA
    100-500 kVA
    Understanding the total kVA requirement of a critical load is a key part of establishing a UPS’ true sizing requirement. For more information see kVA calculator and guide to choosing a UPS.
    Modular
    Modular
    UPS systems such as the PowerWAVE 9000DPA Series are configured by plugging up to five modules into a 19” rack to meet the capacity and redundancy requirement of the application load. This provides more flexibility and scalability than a complete cabinet containing a single standalone system.
    Innovative 5 x 100kW modular UPS system offering pay-as-you-grow scalability combined with 99.9999%
    Read moreCompare
  • PowerWAVE J Series – 22–250kVA John Deere Generators

    PowerWAVE J Series

    Three phase
    Three phase
    A three-phase installation uses the full three phases which are generated from the grid. A three phase electrical supply comprises of three individual sine waves, and can be installed as either a three wire or three wire & neutral configuration. A three-phase source would typically come from a local transformer, with the standard three phase voltage being 400/415 VAC.
    22-440 kVA
    22-440 kVA
    Understanding the total kVA requirement of a critical load is a key part of establishing a UPS’ true sizing requirement. For more information see kVA calculator and guide to choosing a UPS.
    Series of three phase UPS generators providing power from 22 to 440 kVA. Each generator is powered b
    Read moreCompare
  • PowerWAVE T Series – 5–44kVA Mitsubishi /Diesel Generators

    PowerWAVE T Series

    Single phase
    Single phase
    A single-phase installation consists of a single sine wave input and is typically a single phase of a larger three phase supply. A typical example of this would be a local three pin UK socket which uses 230/240 VAC to supply power. Most small power hardware including rack-mounted servers, telecoms, network switches, computer systems or any device running from a standard three pin UK plug, operate from a single phase supply.
    Three phase
    Three phase
    A three-phase installation uses the full three phases which are generated from the grid. A three phase electrical supply comprises of three individual sine waves, and can be installed as either a three wire or three wire & neutral configuration. A three-phase source would typically come from a local transformer, with the standard three phase voltage being 400/415 VAC.
    5-44 kVA
    5-44 kVA
    Understanding the total kVA requirement of a critical load is a key part of establishing a UPS’ true sizing requirement. For more information see kVA calculator and guide to choosing a UPS.
    Powerful series of standby generators available in 11 models from 5kVA to 44kVA for single and three
    Read moreCompare
  • PowerWAVE V Series – 250–650kVA Volvo Diesel Generators

    PowerWAVE V Series

    Three phase
    Three phase
    A three-phase installation uses the full three phases which are generated from the grid. A three phase electrical supply comprises of three individual sine waves, and can be installed as either a three wire or three wire & neutral configuration. A three-phase source would typically come from a local transformer, with the standard three phase voltage being 400/415 VAC.
    220-700 kVA
    220-700 kVA
    Understanding the total kVA requirement of a critical load is a key part of establishing a UPS’ true sizing requirement. For more information see kVA calculator and guide to choosing a UPS.
    High specification range of UPS generators providing ‘turnkey’ backup power with TELYS control panel
    Read moreCompare

Related Resources

Related Case Studies

Top

Pin It on Pinterest

Share This